Bulk material estimator · US units
Stone Calculator: Cubic Yards, Tons & Cost
Free stone calculator for crushed stone, #57 and crusher run. Get cubic yards, tons, bags and cost from your area and depth, with density and coverage data.
Enter your measurements to get an order slip you can read at the counter.
What this stone calculator does
Crushed stone is ordered by the cubic yard from a landscape yard, by the ton from a quarry, and by the bag from a hardware store. This calculator turns your measurements into all three, adds your waste allowance, and puts an estimated cost next to them. Change the stone type to move the density and the tonnage follows.
How to use it
- Measure the footprint. A driveway, a path, a dry creek bed or a drainage trench all reduce to length x width.
- Set the depth. Two inches for decorative cover, four inches for a walking path, six to twelve inches for a driveway base.
- Add waste. Ten percent covers spillage and uneven ground. Fifteen to twenty percent if the subgrade is soft or the trench is deep.
- Enter the local price. Quarry prices move with haul distance, so use the number your supplier gave you.
- Copy the bold line. Send it to the yard as written.
The arithmetic in four lines
- Square feet = length x width.
- Cubic feet = square feet x depth in feet.
- Cubic yards = cubic feet / 27.
- Tons = cubic feet x 105 / 2000.
Stone is planned at 105 pounds per cubic foot in this calculator. If your supplier quotes a different density, the yardage stays the same and only the tonnage moves.
Stone type changes the weight, not the volume
A cubic yard is a cubic yard whatever you put in it. What changes is how much that yard weighs:
- #57 crushed stone: roughly 105 pounds per cubic foot, the all purpose drainage and driveway stone.
- #4 ballast: larger stone, similar weight per cubic foot, used as a base course under heavy loads.
- Crusher run: stone dust mixed with crushed stone, compacts to a hard surface, about 110 pounds per cubic foot.
- River rock: smooth rounded stone, lighter per cubic foot because the pieces nest with more voids.
- Rip rap: large armour stone, quoted by the ton and placed by machine, not by wheelbarrow.
Choose the type before you order, because the wrong stone cannot be fixed by ordering more of it. #57 under a paver patio will not lock; crusher run around a foundation drain will clog.
Coverage per cubic yard
- 1 inch deep: about 324 square feet.
- 2 inches deep: about 162 square feet.
- 3 inches deep: about 108 square feet.
- 4 inches deep: about 81 square feet.
- 6 inches deep: about 54 square feet.
- 12 inches deep: about 27 square feet.
For a driveway built in two lifts, run the calculator once per lift. Six inches of base is two three inch lifts, compacted between them, not one six inch dump.
A worked example
A 40 foot by 10 foot path at 3 inches deep in #57 stone:
- Area: 40 x 10 = 400 square feet.
- Volume: 400 x 0.25 feet = 100 cubic feet.
- Yards: 100 / 27 = 3.7 cubic yards.
- With ten percent waste: 4.07 cubic yards.
- Weight: 110 cubic feet x 105 = 11,550 pounds, or 5.8 tons.
Five and a half tons of stone is one delivery, not a truckload of bags. A 0.5 cubic foot bag holds 55 pounds, so the same job would take 220 bags, which is why bags are only sensible for small repairs.
What stone costs and why quotes differ
The stone itself is cheap; the haul is what you pay for. Two yards in the same town can quote very different prices for #57 because one is 8 miles from the quarry and the other is 40. Delivery is usually a flat charge plus a per ton rate beyond a set distance, and a short load fee applies if you order less than a full truck. When you compare quotes, compare the delivered price per ton, not the price at the gate.
Delivery, weight and access
At 105 pounds per cubic foot a yard weighs about 2,800 pounds. A tandem dump truck carries 10 to 15 tons, and it needs a clear approach to tip. Stone is usually tipped in a pile, so leave a space that you do not mind covering with a tarp first. A conveyor truck costs more but throws the stone where you want it, which saves hours of shovelling on a long driveway.
Mistakes that cost money
- Ordering by the yard when the quarry quotes by the ton, then comparing the two numbers as if they were the same.
- One deep lift instead of two compacted lifts on a driveway.
- Forgetting that #57 does not compact into a firm surface without a binder.
- Placing decorative stone directly on soil without a weed fabric.
- Under-ordering and paying a second short load fee.
Questions people ask
How many tons are in a cubic yard of crushed stone? About 1.4 tons at 105 pounds per cubic foot. A yard weighs roughly 2,800 pounds.
How much stone do I need for a 10 by 20 foot area? At 2 inches deep that is 200 square feet x 0.167 feet = 33 cubic feet, about 1.2 cubic yards, or 1.7 tons.
How deep should a gravel driveway be? Four inches of compacted base as a minimum for a car, six to twelve inches for regular use, built in lifts and compacted as you go.
What is the difference between #57 and crusher run? #57 is clean single size stone that drains. Crusher run includes stone dust so it binds and compacts hard.
Can I use this for rip rap? The arithmetic holds, but rip rap is placed by machine at a depth set by the engineer, and the weights here assume smaller crushed stone.
How many bags of stone make a yard? 54 bags at 0.5 cubic feet each.
Estimates only. Confirm density and price with your supplier before ordering.